How to Troubleshoot Issues Faced During Netgear N300 Setup?

Rate this post

Do you want to access a blazing-fast and seamless internet connection? If the answer is yes, then we recommend you perform a Netgear N300 setup. Setting up an N300 WiFi extender will allow you to access the internet from every corner of your house. In other words, no matter in which corner you’re sitting, you won’t face any issues while trying to access the internet.

This was about the pros of setting up an N300 extender. Now, let’s talk about the cons. Many users have reported that they face issues while trying to set up an extender – the power LED light doesn’t turn green, can’t access, can’t connect the PC to the extender’s network, etc. Are you facing similar issues? If the answer is yes, congratulations! You’ve landed on the right post in search of a solution.

Here, we’ve listed down various issues that users face while performing Netgear N300 setup along with their relevant solutions. Thus, read on.

Troubleshooting: Netgear N300 Setup Issues

Issue 1. Power LED isn’t Turning Green

Solution: Is the power LED light on your Netgear WiFi extender not turning green? No problem! Keep the following points in mind to ensure that the LED on your device turns green:

  • Make sure that the power cable connecting your Netgear extender to the wall socket is free of damages. In case it is damaged from any end, get it replaced with a new one right away.

  • The wall socket that your Netgear device is plugged in should be in working condition.

  • Your LED also might not be turning green because it’s damaged. Thus, confirm this thing once. In case it is damaged, get it fixed.

  • Additionally, ensure that your Netgear N300 extender is receiving enough power supply from the wall socket. Otherwise, forget about the LED light turning green, it’ll start blinking amber.

Issue 2. Can’t Access

Solution: Another issue that users get stuck with during Netgear N300 setup is not being able to access It might be because of an incorrect web address or the web address you’re using isn’t compatible with your device.

Therefore, it is recommended that you keep your eyes open while entering the default web address. The default web address of your device is or In case you need any more information regarding the web address of your extender, refer to the user manual.

Note: If you want to set up the N300 extender using your mobile, then use mywifiext.local instead of using

Issue 3. Unable to Change the Extender’s SSID

Solution: Netgear WiFi extenders come with a default SSID and password. Your Netgear N300 extender has a default SSID (network name) and password too. If you have been experiencing issues while trying to change the default SSID of your extender, then that’s probably because you aren’t following the correct process.

Walkthrough the instructions mentioned below and learn how to properly change the SSID (network name) of your Netgear N300 extender:

  • Power on your Netgear extender and connect it to the router.

  • Then, switch on your PC and connect it to the extender’s network.

  • Access the Netgear Genie Setup Wizard and go to Settings.

  • Select Wireless Settings and enter the new network name under the SSID field.

  • Click on the Save button and wait for your changes to get saved.

If you follow the aforementioned guidelines properly, you’ll surely be able to change the network name of your Netgear N300 extender without any hassle.

The Bottom Line

Thus, this was all about how to troubleshoot the issues faced during Netgear N300 setup. Let’s hope that this post helped you in fixing whatever issues you were facing with your WiFi device. On the off chance, if you are still stuck with setup issues, then we recommend you power cycle your WiFi range extender. Doing so will surely work in your favor.

I have 22 Year experience in website development, blogging, Seo, Link building. Digital Mareting Expert Certified By Hubspot Academy. Social Media Marketing Expert Certifed by Hubspot Academy. Google Adword Certifed Expert.

Leave a Comment