Failsafe Ways to Fix Linksys Router Not Broadcasting SSID Issue

Rate this post

My Linksys router is not broadcasting SSID? Tried everything to fixed the issue but nothing worked. If these queries are similar to yours, then this post is for you. In this post, we will make you familiar with various fixes to get rid of Linksys router not broadcasting SSID issue in no time. Let’s get the ball rolling!

Fixed: Linksys Router Not Broadcasting SSID Issue

  1. Relocate Your Linksys Router

If you have kept your Linksys router inside a cabinet, then its network name (SSID) will not show up in the list of available and active networks.

In order to fix the issue, it is suggested to place the router where it can easily receive the WiFi signals from your home modem/ router. Also, keep your Linksys router away from the reach of neighboring WiFi networks.

Once you are done with the placement process, connect your PC laptop to the Linksys WiFi and see if you can access the routerlogin page or not.

  1. Power Cycle Your Linksys Router

To give your Linksys router a fresh start without deleting any customized settings, we recommend you power cycle it once.

To initiate the process, do the following:

Step 1: Fist things first, unplug your Linksys router from the electric wall outlet and also disconnect it from your home router/ modem.

Step 2: Once you’re done, we suggest you give your Linksys router some rest.

Step 3: Now what you have to do is to plug in your Linksys router again and connect it to your home router/ modem using an Ethernet cable.

See, how simple is the process. You have successfully power cycled your Linksys router.

Note: The power cycle process will also help you resolve the following issues:

  • Linksys router red light issue

  • Linksys router keeps on disconnecting

  • Linksys router connected but no internet

  • Can’t log in to Linksys router

  1. Ensure to Configure Your Linksys Router Properly

Bear in mind – if you haven’t completed the Linksys router setup process, then also you may encounter with the annoying issue. Thus, to fix it and to get the most out of your router’s WiFi, ensure to complete the Linksys router setup properly. Doing so will also help you access the internet everywhere in your house without any hassle.

  1. Reset Your Linksys Router

If none of the troubleshooting tips have helped you out to resolve the issue, then consider resetting your Linksys router back to the default factory settings.

To initiate the Linksys router reset process, do the following:

Step 1: Disconnect your Linksys router from the connected devices

Step 2: Once you’re done, locate the Linksys router reset hole and once found, push it gently using a pin or a paper clip.

Step 3: Keep holding the reset hole for a couple of minutes and then release it.

Step 4: That’s it! Your Linksys router has been reset successfully. Now, we recommend you configure your Linksys device again by following the instructions provided on routerlogin page.

Bonus Tip: Though Linksys routers are one of the best devices to provide your uninterrupted internet range in every corner of your house. But, they might not be capable of covering dead zones. So, sensing the needs of internet lovers, we suggest them to add a Linksys extender to their home network. Just perform the Linksys extender setup process and see the difference.

The Final Words

We hope that the failsafe ways – we provided in this post have helped you out to fix Linksys Router not broadcasting SSID issue? On the off chance of the issue remains the same, contact our technical experts via comments now. They will surely help you fix the issue within minutes.

I have 15 Year experience in website development, blogging, Seo, Content writing, and Link building.

Leave a Comment

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.