When you power on your Netgear router, the power LED on it will blink for some time and then becomes stable. But what if the power LED on your Netgear router continues to blink? Don’t sweat over it! By following the troubleshooting fixes mentioned in this post, you will surely fix the “blinking power LED on Netgear router” issue in no time. Let’s hit the nail on the head!
Resolved: Blinking Power LED on Netgear Router
Check the Netgear Router’s Power Adapter
Start by checking the power adapter of your Netgear router. Be sure that the power adapter of your Netgear router is properly plugged into a working wall outlet. In the event that the Netgear router’s power adapter wire includes any cuts or damages, replace it right away. Apart from that, your Netgear router must receive a constant power supply from the wall socket you have chosen to plug it in.
Check the Hardware of Your Netgear Router
Bear in mind that any damage in the parts of your Netgear router may also lead you to the blinking power LED issue. Any of its hardware can be broken or damaged. So, be very careful while unboxing your Netgear router (if it is new). In the event that you find any of its hardware damaged, replace it right away.
Check all the Cable Connections
In order to prevent blinking power LED issues on your Netgear router, confirm whether all the cables/wires are firmly connected or not. Chances are that the cable you are using to connect your Netgear router, modem, and other devices are damaged. So, it is recommended to check the Ethernet cable prior to connecting your devices with each other.
Once you’re done, try accessing the Nighthawk router login page.
Power Cycle Your Netgear Router
Another way to fix the blinking power LED issue on the Netgear router is to power cycle or restart it. Follow the steps outlined underneath in order to reboot or power cycle your Netgear router:
- Disconnect the connected devices from your Netgear router.
- Then, unplug your Netgear router from the power socket.
- Wait for 5 minutes.
- Plug in back your Netgear router to the power source again.
- Connect your devices to your Netgear router.
Now, see whether the blinking power LED issue on your Netgear router is fixed or not. If yes, then check your internet connection by accessing the routerlogin net web page. If the web page loads up without displaying any error message or popup, then your internet connection is working fine. If you see routerlogin.net not working error, then the one and only way to fix this issue is to update your Netgear device’s firmware.
Update the Firmware of Your Netgear Router
On the off chance if the firmware of your Netgear router is outdated, then you may come across with various technical issues. To fix issues with your Netgear router, download and install the latest firmware version on your Netgear router. Here’s how to get the job done.
- Power on your Netgear router and connect it to your modem using an Ethernet or with the help of a wireless connection.
- Launch a web browser of your choice on a PC or laptop.
- Head towards the address bar of the internet browser.
- Enter 192.168.1.1 carefully without typos in the internet browser URL bar field.
- Hit the Enter key to get redirected to the Netgear router login page.
- Enter the router’s username and password and hit the Log In button.
- Select the Firmware Update section and thereafter, click on the Check button. It will detect the new and available firmware update for your Netgear router. This process might take 2-3 minutes.
- Once found, get the firmware updated by clicking on the Update button.
That’s it! In this way, you can update the firmware of your Netgear router in minutes. Now, see whether the blinking power LED issue is fixed or not. Still, the same issue troubling you? No worries! Our technicians can help! Drop all your queries in the comments section and leave everything to us.
